Five vanity types.
Built to measure.
Every type is configured in the Vanify Builder and built to your exact dimensions. Choose the form; we engineer the rest.
Custom Floating Vanities Melbourne
A floating vanity is wall-hung, with the cabinet fixed to the wall and a clear gap beneath it to the floor. It makes a small bathroom feel larger, simplifies floor cleaning, and suits a contemporary, lighter look. We engineer the carcass and wall fixings to carry the cabinet and benchtop — including stone — so the floating appearance never compromises the structure.
Specs you control
- Overall width 500–3600 mm
- Mount height 200–600 mm off the floor
- Wall-fixed, no floor contact
Configuration
- All module layouts
- Laminate or stone benchtops
- Box or bevelled fingerpull, or catalogue handles
Questions
Custom Semi-Floating Vanities Melbourne
A semi-floating vanity combines a wall-hung cabinet with a visible support or a base set back from the front, giving the lightness of a floating unit with extra reassurance of support. It is a middle path between fully wall-hung and floor-mounted, and works well where you want the floating look but prefer additional load capacity for heavier benchtops or wider runs. The set-back base also doubles as a recessed kicker that conceals plumbing. Where a builder has pipes coming up through the floor near the back wall, the recessed kicker hides them.
Specs you control
- Overall width 500–3600 mm
- Wall-hung with set-back support
- Suits wider, heavier configurations
Configuration
- All module layouts
- Laminate or stone benchtops
- Full hardware range
Questions
Custom Semi-Recessed Vanities Melbourne
A semi-recessed vanity is built so the basin projects forward of a shallower cabinet, letting you fit a usable basin into a narrow space where a full-depth vanity would not work. It is a practical answer to tight bathrooms, powder rooms and ensuites — you keep a real basin and some storage without the cabinet eating into the room.
Specs you control
- Overall width 500–3600 mm
- Reduced cabinet depth
- Basin projects forward of the carcass
Configuration
- Module layouts suited to shallow depth
- Laminate or stone benchtops
- Basin and tap-hole position you choose
Questions
Custom Floor-Mounted Vanities Melbourne
A floor-mounted vanity sits on the floor, carrying its load directly to the ground. It offers the most storage and the simplest installation, and suits classic and transitional bathrooms as well as wider runs. With no wall load to engineer around, it readily carries stone benchtops and tall cabinets, and hides plumbing neatly within the carcass.
Specs you control
- Overall width 500–3600 mm
- Cabinet height 700–850 mm
- Floor-bearing, plumbing concealed
Configuration
- All module layouts
- Laminate or stone benchtops
- Full hardware range
Questions
Custom Shaving Cabinets Vanities Melbourne
A shaving cabinet is a wall-mounted storage cabinet, usually mirrored, fitted above or beside the vanity. Made to your dimensions, it adds concealed storage at eye level and lets you match finishes and hardware to the vanity below for a coordinated bathroom. Configure width and module layout to suit the wall and the mirror run you want.
Specs you control
- Made to your wall dimensions
- Wall-mounted at eye level
- Mirrored or solid fronts
Configuration
- Module and shelf layout you choose
- Finish matched to the vanity
- Hardware matched to the vanity
Questions
Recent vanities, installed
A selection of finished vanities in Melbourne bathrooms — floating, floor-mounted and everything between, in oak, charcoal, stone and laminate.
01 / 13
Built tospec.
One configurable system, quoted as you go and confirmed to a production date.
Start your buildBuild a vanity in 3 minutes.
Choose size, configure, confirm. Indicative pricing as you go.
Melbourne manufactured · Built to your specification · 3-7 week lead time · Colourbox Kitchens